SOtM docs

Trace:

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
en:how_to_install_dx-usb_hd_driver [2016/11/17 22:52] – sanghoonen:how_to_install_dx-usb_hd_driver [2024/02/20 02:56] (current) – [Download] admin
Line 1: Line 1:
 ====== Download ====== ====== Download ======
-Download dX-USB HD windows driver file from http://www.sotm-audio.com/sotmwp/english/portfolio-item/dx-usb-hd/+Download the dX-USB HD windows driver file from http://www.sotm-audio.com/sotmwp/english/portfolio-item/dx-usb-hd/
  
 +Click here to see the installation video, https://drive.google.com/file/d/1lD6Z-KeX8YV5poR2zslvm2yGrVjRH_0V/view?usp=sharing
 ====== Install ====== ====== Install ======
-Unzip downloaded file and run setup.exe+Unzip the downloaded file and run setup.exe
  
-Please click "Next" button to proceed the next steps +Please click the "Next" button to proceed to the next steps 
-{{ :en:capture_20161118120901.png |}}+{{ :en:capture_20161118120901.png }}
  
-Checking system status. Please connect the unit to PC by USB cable and make sure the unit is in operation status. +Checking system status. Please connect the unit to a PC by USB cable and make sure the unit is operational. 
-{{ :en:capture_20161118120910.png |}}+{{ :en:capture_20161118120910.png }}
  
-And installation is started. Press the "Next" button to go to the final stage once the setup is completed. +Installation is started. Press the "Next" button to go to the final stage once the setup is completed. 
-{{ :en:capture_20161118120954.png |}}+{{ :en:capture_20161118120954.png }}
  
 <note important> <note important>
-Caution : Depends on USB audio class 2.0 driver version, the unit should be connected to PC by USB cable, and install the driver while the unit is in operation.+Caution : This depends on USB audio class 2.0 driver version, the unit should be connected to PC by USB cable, and install the driver while the unit is in operation.
 </note> </note>
  
-To complete the installation the driver, please click the "Finish" button. +To complete the installation of the driver, please click the "Finish" button. 
-{{ :en:capture_20161118121021.png |}}+{{ :en:capture_20161118121021.png }}
  
 ====== Control Panel ====== ====== Control Panel ======
 SOtM USB Audio Control Panel’s icon will appear on the task bar once the installation has finished. SOtM USB Audio Control Panel’s icon will appear on the task bar once the installation has finished.
-{{ :en:capture_20161118121245.png |}}+{{ :en:capture_20161118121245.png }}
  
 Please double click the Control Panel icon and then the driver information will appear, you can check the driver version information and etc. Please double click the Control Panel icon and then the driver information will appear, you can check the driver version information and etc.
-{{ :en:capture_20161118121254.png |}}+{{ :en:capture_20161118121254.png }}
  
 If you select "Buffer Settings", you can adjust the streaming Buffer Size and ASIO Buffer Size. If you select "Buffer Settings", you can adjust the streaming Buffer Size and ASIO Buffer Size.
-{{ :en:capture_20161118121623.png |}}+{{ :en:capture_20161118121623.png }}
  
 The Volume Control will be shown as the below image, and you can control the maximum(0dB) and minimum(Mute) values by the buttons or the slide bars. The Volume Control will be shown as the below image, and you can control the maximum(0dB) and minimum(Mute) values by the buttons or the slide bars.
-{{ :en:capture_20161118121555.png |}}+{{ :en:capture_20161118121555.png }}
  
 ====== Upgrade Firmware ====== ====== Upgrade Firmware ======
-Start firmware upgrade application. +Start the firmware upgrade application. 
-{{ :en:capture_20161118121900.png |}}+{{ :en:capture_20161118121900.png }}
  
-Window of firmware upgrade application. +Firmware upgrade application window. 
-{{ :en:capture_20161118121657.png |}}+{{ :en:capture_20161118121657.png }}
  
-Select firmware file and start upgrade. +Select the firmware file and start the upgrade. 
-{{ :en:capture_20161118122009.png |}}+{{ :en:capture_20161118122009.png }}
  
 Finish upgrade. Finish upgrade.
-{{ :en:capture_20161118122026.png |}}+{{ :en:capture_20161118122026.png }}
  
-You can see result of upgrade in control panel. +You can see the result of the upgrade in the control panel. 
-{{ :en:capture_20161118122106.png |}}+{{ :en:capture_20161118122106.png }}
  
  
  
Last modified: 2016/11/17 22:52

Copyright © 2008-2026 SOtM. All rights reserved.