SOtM docs

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
en:eunhasu:burn_sdcard_image [2026/10/19 18:47] – adminen:eunhasu:burn_sdcard_image [2026/10/19 18:49] (current) – admin
Line 8: Line 8:
 - Download the latest Eunhasu image file and unzip it. Please note the image file is quite big. To download the Eunhasu image file, please send the serial number of your unit to the email address below: info@sotm-audio.com - Download the latest Eunhasu image file and unzip it. Please note the image file is quite big. To download the Eunhasu image file, please send the serial number of your unit to the email address below: info@sotm-audio.com
  
-- Download the [[http://www.osforensics.com/downloads/imageusb.zip|i**mageUSB**]] utility and unzip it, or try using [[https://www.balena.io/etcher|Balena Etcher]] as it may work more reliably depending on your system.+- Download the [[http://www.osforensics.com/downloads/imageusb.zip|imageUSB]] utility and unzip it, or try using [[https://www.balena.io/etcher|Balena Etcher]] as it may work more reliably depending on your system.
  
 - Press gently on the micro SD card in the micro SD card slot on the rear panel of sMS-200 to take it out, and insert it into a micro SD card reader. The micro SD card slot is "push-push type", so after loading the image file to the micro SD card, you can insert the micro SD card back into the slot. Once it's inserted properly, you will hear a click sound. - Press gently on the micro SD card in the micro SD card slot on the rear panel of sMS-200 to take it out, and insert it into a micro SD card reader. The micro SD card slot is "push-push type", so after loading the image file to the micro SD card, you can insert the micro SD card back into the slot. Once it's inserted properly, you will hear a click sound.